Plastic Folding Bins
The Contrak Plastic Folding Bin (click here to view image) is 1162mm x 1162mm x 780mm folding down to 280mm. A 2.8 folding ratio.
The Contrak Folding Bin is manufactured in vented and non-vented format (click here to view image).
The vented bin is produced specifically for the storage and transportation of produce (click here to view image) and fruit which allows considerable air flow throughout the product to maintain temperature and freshness.
The bin’s carrying capacity is 500kg and is 2-way entry with two drop down gates on opposing sides, which are a substantial OH&S advantage.
The Contrak Folding Bin has an internal space, located inside the bearer foot, for an RFID tag which is fully protected, with a tag size of up to 200mm.
The bin has allocated label holder space on each gate and on each side of the pillar 200 x 70mm.
Bin volume capacity is 750 litres.
The Contrak Folding Bin has racking locating recess of 10mm deep, twice on each side of the bearer.
Bins purchased, Contrak will print your logo and your company colours on the hinges and clips, enhancing your company image.
View the Contrak Folding Bin – Vented flyer (480KB).
Folding Bin Options:
- Lid (click here to view image)
- Company Logo
- Company colours on hinges and clips
Folding Bin Lid:
The Contrak Folding Bin is available with a unique detachable lid that clips into place securely. Bins are able to be stacked (click here to view image) on top of each other with the lids attached.
| Contrak Plastic Bin Specifications | |
| Dimensions: | External: 1162mm x 1162mm x 780mm high |
| Internal: 1090mm x 1080mm x 635mm high | |
| Bin tare weight: | 48kg non vented |
| 47kg vented | |
| Folded height | 280mm |
| Volume capacity | 750 litre |
| Access drop gates: | Each unit has two access drop gates (860mm wide x 300mm high) |
| Fork access height: | 95mm x 862mm |
| Stacking recess: | 13mm |
| Suitable for temperature: | -20 to +40 |
| Friction pads: | On bearers(5 per side) and pads also on base (3 per side) |
| 2-way entry: | Yes |
| Load carrying: | Capacity: 500kg |
| Static: 3,000kg | |
| Dynamic: 1,000kg | |
| Racking locator recess: | 10mm deep (twice on each side) |
| Total bearer length is 1162mm made up of 2 x 22 mm long x 10mm deep racking locator recesses and both are located 158mm from each end | |
| Label locators: | Four x corrugated label locators with one on each side of the drop gates |
| Logo inserts: | 3 x logo inserts on the front and back of the base gate sides |
| Drain holes: | Located in the middle of the floor base |
| Bin is RFID enabled: | With tag size of up to 200mm able to be placed inside of the bearer foot. |
| Bin cover/lid: | Optional |
| Vented or unvented: | Bin can be supplied in vented or unvented form with vents being 10mm wide x 40mm high |
| Label holders: | 2 x label holders on each gate being 200mm x 70mm |