Plastic Folding Bins


Vented and non-vented

The Contrak Plastic Folding Bin is 1162mm x 1162mm x 780mm folding down to 280mm, a 2.8 folding ratio.

The Contrak Folding Bin is manufactured in vented and non-vented format. The vented bin is produced specifically for the storage and transportation of produce and fruit which allows considerable air flow throughout the product to maintain temperature and freshness.

The bin’s carrying capacity is 500kg and is 2-way entry with two drop down gates on opposing sides, which are a substantial OH&S advantage.

The bin has allocated label holder space on each gate and on each side of the pillar 200 x 70mm. Bin volume capacity is 750 litres.

The Contrak Folding Bin has racking locating recess of 10mm deep, twice on each side of the bearer.

Bins purchased, Contrak can print your logo and your company colours on the hinges and clips, enhancing your company image.

Options

• Company Logo and Company colours on hinges and clips (Company colours on a minimum purchase)

• The Contrak Folding Bin is available with a lid. Bins are able to be stacked on top of each other with the lids attached.

Features

• Standard Australian Footprint
• Front and rear gates
• Internal rounded air vents
• Free air flowing vented base for quick chilling
• 2-way entryRacking locators
• Drain holesFood grade quality
• UV stabilised
• 4 label holders
• Company logo printed
• Dust cover lid available
• Vented and non-vented models
• 3:1 Fold down ratio

Product showcase

Specifications

External: 1162mm x 1162mm x 780mm high
Internal: 1090mm x 1080mm x 635mm high
Tare: 53kg
Volume capacity: 750 L
Access drop gates: With or without two access drop gates (860mm wide x 300mm high)
Fork access height: 95mm x 862mm
Stacking recess: 13mm
Suitable for temperature: -20 to +40
Friction pads: On bearers(5 per side) and pads also on base (3 per side)
2-way entry: yes
Load carrying: Capacity: 500kg
Static: 3000kg
Dynamic: 1000kg
Racking locator recess: 10mm deep (twice on each side)
Label locators: Four x corrugated label locators with one on each side of the drop gates
Logo inserts: Inserts on the front and back of the base gate sides
Drain holes: Located in the middle of the floor base
Bin cover/lid: Optional
Vented or unvented: Bin can be supplied in vented or unvented form with vents being 10mm wide x 40mm high
Label holders: label holders front and back
200mm x 70mm

Product Code

• CFB-V (vented)
• CFB-NV (non vented)

Request A quote today

Please contact us today to request a quote for your required products.